The Powder Tray ensures the powder can be quickly and properly spread into the capsules during the filling step. The notches on the Powder Tray help to guide the placement of the tamper.
Use tamper to pack powder into capsules for faster filling and higher fill weights.
Vibrators offer faster filling of powders that "bridge" or are granular, fluid or "flour" like. It also reduces weight variation for fine powders. CE certificate provided.
Use tamper to pack powder into capsules for faster filling and higher fill weights.
Use tamper to pack powder into capsules for faster filling and higher fill weights.
Adjustment-free Spacer Plate ensures a fast and easy setup without the need of calibrating the capsule heights. Simply insert the polycarbonate Spacer Plate of the corresponding size on the pegs found on the Filler Base and proceed with assembly of the remaining plates.
Fill fewer than 100 capsules per batch. Prepare batch sizes in increments of 10. Included: Orienter Divider / Powder Tray Divider / 5-Pin Tamper
The bottom locating pins aligns perfectly with the caps tray. The easy-to-operate sliding tray mechanism makes it possible for 50 capsules to be simultaneously fed into the capsule machine. The "perfect fit" design allows for 100 % orientation of the capsules every time.
The Profiller 1100 Locking Plate with domes is made out of polycarbonate and helps to prevent capsule cap dents.
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
A Conversion Kit is required when switching to a size 000 on the ProFiller 1100. The Conversion Kit includes an Orienter Base and Capsule Locking Plate. This Conversion Kit needs to be ordered with size 000 change parts to successfully fill size 000 capsules.
