Air Science Purair BIO Class II A2 Biological Safety Cabinet, with Base Stand

The Purair BIO is designed to protect individuals, the environment, and products from a variety of biological particulates, serving as the primary barrier in life science research and experimentation. As a Class II Type A2 biosafety cabinet, the Purair BIO minimizes and contains Biosafety Level 1-3 agents, maintaining negative pressure inside the cabinet during operation to prevent contaminants from escaping the work area. HEPA filtration scours 70 % of the incoming room air to protect the products, while the remaining 30 % of the exhausted air is filtered by a second HEPA filter. Purair BIO cabinets provide ample workspace with environmentally sound operation and low energy consumption. ISO Class 5, Biosafety Level 1, 2 or 3 Containment, Base Stand Included Product Dimensions: W 56.3" × D 34.9" × H 64.2"

Air Science Purair Basic Spill Tray

This chemically resistant spill tray is used with the PurAir Basic Ductless Fume Hood to contains spills and simplify cleaning procedures.

Air Science Purair Basic Ductless Fume Hood

The Purair Basic ductless fume hoods are a series of high efficiency laboratory filtration products designed to protect the user and the environment from hazardous vapors generated on the work surface. At the heart of the Purair fume hood product line is the innovative Air Science Multiplex Filtration Technology that creates a safe work environment over the widest range of applications in the industry. **Unit comes unassembled and requires assembly for set up** **Please refer to units Manual for instructions**

Air Science Purair Basic Canopy

Air Science Purair Basic Base Stand

This telescoping base stand provides mobility to your hood setup. The base stand is equipped with a lower storage shelf and accommodates wheelchair access. Locking casters fix the hood in place.

Air Science Purair Basic and RX Series HEPA Filter

The PurAir Basic and these HEPA filters will capture all powders and particulates, making the hood to be commonly known as a non-sterile powder containment hood.

Air Science Purair Advanced Primary HEPA Filter

HEPA filter for Purair Advance Models. These self-contained filters are designed to physically capture particles larger than 0.3 microns with >99.999% typical efficiency.

Air Science Purair Advanced Exhaust Collar

The exhaust collar allows the enclosure to be thimble-ducted to the outside for additional protection.

Air Science Purair Advanced Ductless Fume Hood

The Purair Advanced Series ductless fume hoods are a series of high-efficiency products designed to protect the user and the environment from hazardous vapors generated on the work surface. Product Dimensions: W 34" × D 27.375" × H 53"

Air Science Purair Advanced Base Stand with Casters, 6'

The mobile cart provides a lower storage shelf; accommodates wheelchair access. Locking casters fix the hood in place.

Air Science Fume Box HEPA Filter

This filter is for fine powders and particulates. Use alongside the pre-filter to remove contaminants from the air. Refer to all applicable laws, regulations, and guidelines to evaluate suitability. If intended for sterile use, further processing and testing is required, including but not limited to bacterial endotoxin testing.

Air Science Ductless Fume Box, 2'

Air Science Fume-Box ductless enclosures are designed to protect the user from chemicals vapors or powders during low-volume chemical manipulations by effectively containing low concentrations of noxious fumes, vapors, or powders.