Fill fewer than 100 capsules per batch. Prepare batch sizes in increments of 10. Included: Orienter Divider / Powder Tray Divider / 5-Pin Tamper
The bottom locating pins aligns perfectly with the caps tray. The easy-to-operate sliding tray mechanism makes it possible for 50 capsules to be simultaneously fed into the capsule machine. The "perfect fit" design allows for 100 % orientation of the capsules every time.
The Profiller 1100 Locking Plate with domes is made out of polycarbonate and helps to prevent capsule cap dents.
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
A Conversion Kit is required when switching to a size 000 on the ProFiller 1100. The Conversion Kit includes an Orienter Base and Capsule Locking Plate. This Conversion Kit needs to be ordered with size 000 change parts to successfully fill size 000 capsules.
Change parts for one capsule size include: Caps Tray / Body Sheet Set (A, B, C) / Spacer Plate / Orienter Tray / Capsule Locker
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
The ProFiller 1100 Capsule Filling System is a mechanical device that aids in filling 100 capsules, with powder, at a time. Though the filling rate is based on the powder flow properties, operator speed & technique and the use of excipients, the output of this system is about 2000 – 3200 capsules per hour. The ProFiller 1100 can also be used to fill capsules with non-aqueous liquids or sticky powders. Included Parts: Hand-held Filler Base, Orienter Base, Locking Plate, 50-Pin Tamper, Powder Spreader, Powder Tray, Powder Tray Clamps and Change Parts (Caps Tray, Body Sheet Set (A, B, C), Spacer Plate, Capsule Locker and Orienter Tray)
Handle mechanism used for locking the capsules in place.
This base kit consists of 1 each of the following: Hand-Held Filler Base, Orienter Base, Locking Plate, Powder Spreader, Powder Tray and 2 Powder Tray Clamps.
Part of the body sheet set typically included in a combination of change parts for the corresponding size.
