Labconco Zero Pressure Weathercap

The Zero Pressure Weathercap is made of strong, corrosion-resistant PVC. The cap adds little static pressure to the exhaust system and allows for vertical discharge of effluent air for dispersion away from the building. For 2 ft, 3 ft, and 4 ft XPert Filtered Balance System Product Dimensions: Ø 6" × H 36"

Labconco XPert Canopy Kit

The canopy connection allows the enclosure to be thimble-ducted to the outside for additional protection. The canopy's air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the filtered air being exhausted from the enclosure. An additional blower source is required.

Labconco RXPert Double Filtered Balance System Canopy Connection, 4'

This canopy connection allows the enclosure to be thimble-ducted to the outside for additional protection. The canopy’s air gap provides a means of balancing air by allowing air to enter the ductwork and mix with the exhausted filtered air from the enclosure.

Labconco Replacement Bag for Bag-In/Bag-Out HEPA and ULPA Filter, 4'

This is a replacement bag for the bag-in/bag-out HEPA and ULPA filter. It helps to ensure that particulate matter is contained during filter change.

Labconco Remote Blower

This Remote Blower is for connection to XPert Balance Enclosure, Protector XVS Ventilation Station, Purifier HEPA Filtered Enclosure, Protector Work Station or Protector Demonstration Hood. The direct drive blower has a 1/4hp TEFC-type motor and overcomes external static pressure of 0.5" at 420 CFM. Recommended for low to moderately corrosive conditions. Phenolic-coated steel housing and wheel. Provides a range of 167 to 560 CFM at 0.125" to 0.87" static pressure.

Labconco Purifier Logic+ Canopy Kit

For thimble ducting Class II, Type A2 Biosafety Cabinets. Canopy provides an air gap to allow room air to enter the ductwork and mix with the filtered air being exhausted to the outside. Inadequate exhaust activates the switch in less than one second and signals the LCD to display an alarm and the motor to increase to maximum speed for personal safety. Adds only 1.25" to the overall height of the cabinet. Exhaust connection is required. Damper and Remote Blower are recommended (not included).

Labconco Manual Exhaust Damper

Manual Duct Damper, powder-coated steel, 6" nominal diameter. This product is used in conjunction with a canopy connection to allow the hood enclosure to be thimble ducted to the outside.

Labconco HEPA Filter

Replacement HEPA Filter, 99.99 % efficient on particles 0.3 micron in size. Not suitable for use with biohazardous materials or volatile organic material.

Labconco Double HEPA Filtration Kit

Provide a second level of HEPA Filtration to meet United States Pharmacopeia (USP) <800> standard for redundant HEPA Filter in series. Each Kit includes one HEPA Filter, set of bag and straps for bag-in/bag-out system, complete metal support system, as well as certifier installation instructions. Kit adds 12.9" inches to height of an existing System. Contact Labconco for optional Canopy Connection for use with this Kit.

Labconco Blower

Labconco Coated Steel Blowers have been specifically designed to meet the demanding day-to-day ventilation requirements for a wide range of hood choices. Durable and easy to maintain, Coated Steel Blowers are the recommended accessory for fume hoods used for low to moderately corrosive applications. They are offered in a broad spectrum of capacities from 370 to 1960 CFM at static pressures to 1.50" H20. For greater corrosion protection, refer to our Fiberglass and PVC Blowers.

Labconco Air-Tight Damper

Mounts atop the Canopy Connection to adjust exhaust airflow and closes for decontamination procedures. Dampers adjust the biosafety cabinet's exhaust airflow.

AirClean PowderSafe Type B Pre-Filter