Air Science Purair LF Series Horizontal Laminar Flow Cabinet

This laminar flow hood is a high-efficiency product designed to protect equipment and other contents of the work zone from particulates, for applications sensitive to such contamination. It is ideally suited for use with non-hazardous contaminants and when flexible access to the equipment in the work zone is desired. It can be used in applications where there is no generation of biohazardous materials and operator protection is not required such as Mycology and food microbiology, plant and mammalian cell culture, clinical pharmacy and hospital use, clean rooms, semiconductor assembly, pharmaceutical, aerospace, medical device assembly, and research laboratories. *Base stand not included* 4 ft Product Dimensions: W 49.3" × D 29.5" × H 42.8"

Air Science Purair LF Series Horizontal IV Bar, 4'

This is an interior ban spanning the width of the enclosure. It is used to hang IV bags and other equipment using the "S" hooks.

Air Science Purair LF Series Horizontal Base Stand with Casters, 4'

Floor-standing base for cabinet with locking castors. For Horizontal Laminar Flow Cabinet (6391) Product Dimensions: H 34"

Air Science Purair BIO Class II A2 Biological Safety Cabinet, with Base Stand

The Purair BIO is designed to protect individuals, the environment, and products from a variety of biological particulates, serving as the primary barrier in life science research and experimentation. As a Class II Type A2 biosafety cabinet, the Purair BIO minimizes and contains Biosafety Level 1-3 agents, maintaining negative pressure inside the cabinet during operation to prevent contaminants from escaping the work area. HEPA filtration scours 70 % of the incoming room air to protect the products, while the remaining 30 % of the exhausted air is filtered by a second HEPA filter. Purair BIO cabinets provide ample workspace with environmentally sound operation and low energy consumption. ISO Class 5, Biosafety Level 1, 2 or 3 Containment, Base Stand Included Product Dimensions: W 56.3" × D 34.9" × H 64.2"

Air Science Purair Basic Spill Tray

This chemically resistant spill tray is used with the PurAir Basic Ductless Fume Hood to contains spills and simplify cleaning procedures.

Air Science Purair Basic Ductless Fume Hood

The Purair Basic ductless fume hoods are a series of high efficiency laboratory filtration products designed to protect the user and the environment from hazardous vapors generated on the work surface. At the heart of the Purair fume hood product line is the innovative Air Science Multiplex Filtration Technology that creates a safe work environment over the widest range of applications in the industry. **Unit comes unassembled and requires assembly for set up** **Please refer to units Manual for instructions**

Air Science Purair Basic Canopy

Air Science Purair Basic Base Stand

This telescoping base stand provides mobility to your hood setup. The base stand is equipped with a lower storage shelf and accommodates wheelchair access. Locking casters fix the hood in place.

Air Science Purair Basic and RX Series HEPA Filter

The PurAir Basic and these HEPA filters will capture all powders and particulates, making the hood to be commonly known as a non-sterile powder containment hood.

Air Science Purair Advanced Primary HEPA Filter

HEPA filter for Purair Advance Models. These self-contained filters are designed to physically capture particles larger than 0.3 microns with >99.999% typical efficiency.

Air Science Purair Advanced Exhaust Collar

The exhaust collar allows the enclosure to be thimble-ducted to the outside for additional protection.

Air Science Purair Advanced Ductless Fume Hood

The Purair Advanced Series ductless fume hoods are a series of high-efficiency products designed to protect the user and the environment from hazardous vapors generated on the work surface. Product Dimensions: W 34" × D 27.375" × H 53"